Firmware Update
Update your device firmware directly from Chrome or Edge. Your firmware file is processed locally in your browser and is never uploaded to our servers.
Choose a merged .bin file (flashed at offset 0x0) or an
Intel .hex file. You can add multiple .bin files and set a separate
offset for each. Files are read locally and are never uploaded.
Before you start: use Chrome or Edge on a desktop computer, connect the device with a USB data cable, and close any other app that is using the serial port. If the connection fails, put the device into bootloader mode (hold BOOT, tap RESET, then release BOOT) and try again.
Warning: flashing the wrong firmware can make your device unusable. Only flash firmware supplied by Mach Devices.